Content:
- What does a stainless steel kettle do to clean the outside?
- Popular methods of external cleaning stainless steel kettle
- Recommendations
Electric and simple kettles made of stainless steel - this is the most popular option for modern kitchen, which has only one drawback: they quickly get dirty. How to remove scale from the inside of the kettle is told a lot and often, but housewives are also interested in another question: how to remove pollution from the outer part of the kettle from stainless steel? Consider the most popular methods for cleaning teapots.
What does a stainless steel kettle do to clean the outside?
Below will be described several methods for external cleaning, but before choosing one of them, you need to check if the funds from the list below are at home. To clean the stainless steel kettle outside you can use:
- 9% vinegar.
- Toothpaste.
- Baking soda.
- Melamine sponge.
- Special tools and chemical compounds.
You also need to prepare the inventory, namely:
- Towel.
- Flannel fabric.
- Unused toothbrush.
- Sponge
- Capacity for water and solutions.
Popular methods of external cleaning stainless steel kettle
The teapot has lost its attractive appearance, is constantly getting dirty and ashamed to invite guests? Simply select one of the suggested methods and the kettle will shine like on the day it was purchased.
Method 1
Another effective method for external cleaning of stainless steel dishes from grease and plaque is the use of toothpaste. For this you need:
- Prepare a toothpaste and unused toothbrush.
- Apply a little paste to the brush (if there is no toothbrush, you can use a kitchen sponge, using its hard side to clean).
- Wipe the surface, it should be done carefully.
- Wash the kettle in warm and then in cold water.
- Rub to a shine with a towel or cloth.
Important! Toothpaste should be normal, the use of whitening paste is prohibited, since it consists of large abrasive particles that can leave scratches. The same applies to the friction of the kettle, it must be careful, otherwise the appearance of stainless steel utensils will be spoiled.
Method 2
For external cleaning of the metal kettle, you can use a solution of vinegar and soda. Stages:
- Take the capacity to create a solution.
- Mix in it for 3 tablespoons of vinegar and soda.
- Immerse the kettle in a container and put the structure on fire.
- Boil for 5 minutes, let cool.
- Drain the liquid, wash the kettle with water and wipe it with a sponge.
- Wipe dry with a towel.
It is interesting! When choosing a container, it is necessary to take into account that the kettle must be completely immersed in it. If the solution is not enough, then its amount can be increased, the main thing is to observe the proportion of soda and vinegar 1: 1.
Method 3
Cleaning stainless steel kettle with soda (used only for non-electric models):
- Take the container and fill it with warm water.
- Add soda to the water, for every liter you need to pour 1 tablespoon.
- Immerse the kettle in soda solution.
- Capacity to boil for half an hour.
- Leave to cool the solution.
- Remove plaque with a melamine sponge.
- Rinse stainless steel dishes under running water.
- Wipe with a towel.
It is interesting! It is possible to increase the effectiveness of this method if you pour 20-30 ml of dishwashing liquid into the solution.
Method 4
Classic, fast and simple, but at the same time the most effective way is the use of baking soda. The steps of the procedure are as follows:
- Heat the stainless steel kettle.
- Carefully move it to the table (it is better to lower it into the sink).
- Wet the sponge with warm water and pour soda on it.
- Wipe the outer surface of the dish with a little effort.
- Upon completion of the cleaning works, wash the kettle with warm water and dry it.
- Rinse again, but under running cold water and dry again.
It is interesting! In principle, the heating of metal utensils is not necessary, however, at a higher temperature it is easier to achieve results, because the plaque is eliminated faster. Do not forget that when in contact with hot dishes you need to be careful not to injure yourself in the form of burns. Soda is an abrasive agent, therefore it is forbidden to rub hard, because the integrity of the surface can be damaged by leaving visible scratch marks on it.
Method 5
If household chemicals do not frighten a housewife, then with its help you can easily and quickly remove any visible pollution. For the procedure of cleaning stainless steel dishes, we recommend using “Schumann”, “Cillit” or “Cif”. We need to act as follows:
- Purchase a special cleaner.
- Carefully study his instructions.
- Wear rubber gloves before cleaning to protect your skin from chemicals and toxic substances in its composition.
- Apply the cleaner to the outside of the kettle, wait a certain time (according to the instructions).
- Clean with a sponge.
- Wash several times in warm and then running cold water.
- Wipe with a towel.
Important! Do not ignore safety precautions and be sure to use rubber gloves! If “Schumanit” is selected for cleaning, then you also need to purchase a respirator, since the product has a strong smell and strong concentration. Also, experts recommend the use of new, but already won the confidence of housewives melamine sponge.
Recommendations
To stainless steel dishes had an attractive appearance and always remained clean, just listen to a couple of useful tips, which we will gladly share:
- If someone in the family suffers from allergies, it is better to abandon chemicals and use traditional methods.
- Using chemical agents do not forget about personal safety, use gloves and a respirator, carefully study the instructions and follow the dosages of special equipment.
- Old stains are difficult to remove, so the best method to combat plaque and grease is to eliminate them regularly.
- For starters, it is better to try the most simple and "soft" ways to eliminate fat and plaque. If they were not effective, then you can move to more serious methods, for example, the use of special tools.
