How to clean alcohol at home? Simple and affordable methods

1. Clean alcohol
2. Alcohol cleaning with soda
3. Cleaning with potassium permanganate
4. Use black bread
5. Cleaning moonshine with egg white
6. Frost
7. Activated carbon cleaning
8. Evaluate the result
9. Useful tips

Products presented in grocery stores do not always meet our requirements. This also applies to alcoholic beverages. Therefore, many gourmets cook their own at home. In this case, the issue of alcohol purification becomes urgent.

Clean alcohol

For dilution of ethyl alcohol using raw water. Spring water is traditionally considered the best for this purpose. Very hard water needs to be softened and cleaned.

To clean the alcohol from harmful impurities and bad odor will require:

• soft spring water;
• hydrometer.

It is necessary to lower the hydrometer into the container with alcohol. Fill with water until the instrument readings are set at 45 degrees.

Alcohol cleaning with soda

Habitual and affordable tool can be found in any kitchen.Alcohol contains acetic acid, and soda contains sodium bicarbonate. A chemical reaction occurs, as a result of which acetic acid decomposes into separate, safe components. Thus, in the home there is some purification of alcohol. This is done as follows:

1. Soda diluted with water in equal quantities.
2. Pour the resulting solution into a vessel with alcohol and mix thoroughly.
3. After 1 hour, mix again.
4. We put the capacity in a dark place for the night.
5. In the morning we filter the drink through a layer of charcoal and cotton wool.

Cleaning with potassium permanganate

Clear moonshine can be using potassium permanganate. Below is a step by step guide:

1. Add a small amount of potassium permanganate in a container with an alcohol-containing drink.
2. Stir the drink.
3. As such, it should stand for about 24 hours.
4. Harmful impurities will be on the bottom of the jar in the form of precipitation.
5. At the bottom of the funnel, place the cotton and pour the drink through it into a clean container.

Use black bread

Black bread perfectly absorbs harmful fusel oils. With this method of cleaning, alcohol besides cleansing acquires the pleasant aroma of black bread. Our ancestors also used this method. It is best used at home as a final cleaning.

Rye bread is used as follows:

1. In a jar of alcohol, lower the piece of bread.
2. After the impurities are absorbed, the bread is pulled out.
3. To remove bread crumbs from a drink, it is necessary to filter it through a filter.

Cleaning moonshine with egg white

Under the action of alcohol, the protein collapses, absorbing impurities. In cooking, this is the way to clarify the meat broth.

Instead of egg white, ordinary milk is allowed. Under the influence of alcohol, it also collapses. 200 ml of milk will be required for 1 liter of alcohol or moonshine. Milk is poured into the hot drink, and after the protein in it is rolled up, the alcohol-containing liquid is filtered.

The sequence of actions is as follows:

1. You need a raw, fresh egg (1 egg per can of 3 liters).
2. The protein is separated from the yolk.
3. Protein must be slightly diluted with water and whipped.
4. In the hot drink pour the mixture.
5. For 1-2 days we leave the container with the liquid in a dark place.
6. Carefully pour the drink, the sediment should remain in the bank.
7. We filter.

The strength of the drink when using this method should be at least 50 degrees. Protein does not fold well at lower rates.

Frost

Freezing is an effective way to cleanse alcohol. This method makes the drink stronger and saves it from the muddy sediment.

Fusel oils have properties to stick to the vessel walls when they freeze. The temperature when cleaning alcohol should be very low. Wine must be frozen at a temperature of minus 5 degrees, vodka - at minus 29 degrees.

Use the freezer, put a bottle in it. Pour a clean drink into another container after freezing. All harmful impurities will remain in the ice crystals.

When freezing, a sufficiently strong bottle should be used so that it does not burst when the liquid expands.

Alcohol cleaning activated carbon

Its active ingredients absorb harmful substances, unpleasant odors, and all because it has a powerful absorbing effect. The use of coal is as follows:

1. Activated carbon, ground to a powder, is required.
2. For 1 liter of product you need 1 tablespoon of coal.
3. Stir.
4. We defend about 2-3 weeks.
5. In order for the entire product to react, it is necessary to shake the drink 2 times a day.
6. Filter the drink through cotton wool or a clean cloth.
7. This process must be repeated, while changing the coal.

Evaluate the result

At home you can easily check the purity of the alcohol. This is done like this:

1. Find a mirror or glass. They should be washed using cleaners without additives.
2. Do not wipe the glass. It should dry naturally. In this case there will be no divorces.
3. Drift alcohol drip on cleaned glass. The absence of any traces suggests that there are no impurities and fusel oils in the alcohol.

To check the purity of the glass, you must pour it with distilled water and watch it. Water should not slide down with a quality cleaning, as it happens on greasy surfaces.

Useful tips

In the absence of activated carbon suitable birch. Interpret it and pour it into the container. For 1 liter of drink 50 g of coal is required. Vodka should be infused for 1 week and then filtered. To improve the result, repeat this process several times. At the same time, every time you change the coal to a new one.

Alcohol when performing cleaning should be at room temperature. Harmful substances and fusel oils reluctantly leave the hot solution.

After reading our article, you can decide on an inexpensive and affordable way to self-cleaning alcohol. Purified drinks will be the best decoration of any table. Moreover, they are made with their own hands.