Plastic panels in the bathroom - a great alternative to boring paint or dull ceramic tiles. Finishing with such panels is a rational choice, which saves the owners from construction debris, additional costs and significantly reduces the time of repair work. Despite significant savings, plastic panels do not look cheap at all, but make a good impression and are perfect for any style - from classic to minimalism.
Finishing the bathroom with plastic panels: a rational choice or savings?
A bathroom with constantly high humidity and changing temperature is probably the most problematic place in the apartment. Therefore, the choice of the optimal coverage for this room is as responsible as the subsequent installation and maintenance. Of course, for many ceramic tiles - the most acceptable option for all criteria, but nevertheless, the combination of strength and reliability with the high cost and complexity of installation work make it not the best choice from the point of view of rationality, especially in a limited budget.
That is why PVC bathroom panels are considered an excellent choice. This beautiful material has a number of very important advantages:
- security;
- resistance to temperature extremes and moisture;
- affordable cost and ease of installation;
- wide range of textures and colors.
But not all PVC panels are of good quality.When buying a material for the bathroom, special attention should be paid to the number of stiffeners, because they guarantee the durability and safety of the panels in the event of mechanical stress.
Also look at the surface - it should be perfectly flat.
To the note: choosing panels, watch the uniform coloring of the surface. It is advisable to buy material from one batch.
In addition, it is necessary to make sure that there are no impurities on the back side of the panel, as well as the reality of the dimensions stated on the packaging.
Considering the fact that this type of product belongs to the category of inexpensive finishing, you should not buy too cheap and obviously low-quality material. In the same way, as well as to get them in doubtful shops without the corresponding certificates confirming quality. The guarantee of reliability and the origin of the panels must be supported by accompanying documentation.
Features of installation and care of plastic panels
An important step in the design of the bathroom with plastic panels is the installation process. After all, the quality of their installation will determine not only the desired external effect, but also the service life of such a finish.
Before proceeding with the installation, you should understand some of the nuances of the process. For example, the temperature in the room for laying should be at least 10 degrees. Before installation, it is necessary to allow the plastic to finish, leaving for several days at room temperature.
The installation of panels takes place according to a certain scheme:
1. Preparation. The level of preparation of the walls directly depends on the further choice of fasteners of the panels. For example, the installation of the lathing will require only cleaning the surface from the old coating and all irregularities, and when sticking it is necessary to carefully level the walls.
Note: the treatment of walls with antifungal agent will prevent the occurrence of mold in the bathroom in the future.
2. Installation of slide rails and battens. Because of the high humidity in the bathroom, experts recommend using plastic profiles instead of wooden slats for mounting the batten. Slats placed along the direction of the panels at a distance of no more than 50 mm from each other, are fixed with a level.
3. Specialists recommend installing plastic panels in the vertical direction. This will visually increase the space and prevent moisture retention on the surface of the walls. They cut the material with a sharp knife with notches, which helps to achieve maximum evenness of the edge. The installation process itself is produced gradually, from the starting angle of the groove into the groove.
Note: wider panels are easier to install. Their installation leaves much less waste and dangerous joints on the wall.
4. Fastening the panels to glue is done in the following way: on the prepared flat wall, thinly covered with a layer of adhesive substance, alternately fix plastic panels. In the process, it is necessary to carefully monitor the bleeding glue and clean it off in time.
Plastic panels in the bathroom: stylish design techniques
Despite the inconsistency of judgment, not every type of plastic reduces the price and depersonalizes the interior. Properly selected plastic panels are able to make a small bathroom stylish and cozy, not to mention the economy and practicality of this material.
Although such panels and lay out beautiful patterns and drawings, as is the case with ceramics, but the cost of such a finish is much less. In any case, the color palette of PVC panels for the bathroom is a wide choice for every taste. And do not be afraid to experiment, because dismantling and replacing them with new ones is not difficult.
A plastic finish that is not attractive at first glance can be varied by harmonious alternation of contrasting colors or the embodiment of the ombre effect - a smooth transition from one color to another.An interesting solution for the bathroom - panels with imitation of wood texture to give greater comfort and naturalness of the design.
No less original panels are "marbled", they will add to the room elegance and lightness.
Moreover, modern manufacturers offer new models: with ornaments, drawings, vertical and horizontal patterns. With such a choice, even a budget bathroom interior can be individual and original in its own way.
Plastic panels are considered one of the most practical and rational ways of finishing. This solution for the bathroom is a good combination of economy and practicality with the effect of novelty, aesthetics and interior style.
Tell us what type of decoration in your bathroom and what you think is the most rational and aesthetic?
